METAL PIPE FIBRE LASER CUTTING MACHINE

Fibre laser light energy is created by banks of diodes.  The light is transferred  through special fibre optic cable, an efficient energy transfer compared to conventional methods. The light, upon exiting the fibre cable, is then collimated (straightened) as it approaches the focus lens – which intensifies the beam enabling it to cut through the material with astonishing speed and accuracy.

A. Superb quality of laser beam, constant BPP within all the ranges of laser powers,so that long focus can still achieve an extremely small beam width.

B. electro-optical conversion efficiency of laser supply is 25% more efficient than CO2, therefore electricity consumption is drastically reduced.

C. Laser is transmitted by fiber optic cables, almost no energy loss during transmission to cutting head.

D. Modular design, allows easy assembly and beam alignment is minimal due to fibre optic transfer (No Mirrors). In addition, auto lube traverse systems minimize maintenance procedures.

E. Life span of Laser source is approximately 100,000 hours.

Raytools cutting head with high-performance non-contact capacitive height sensor is used and is designed to withstand high ‘gas assist’ pressures.

A. High cutting speed with the best cutting quality

B. Quick change-over between three focal lengths without changing the TCP (Tool Center Point)

C. Protective window (lens) can be replaced as a consumable part, to extend the life of the focusing lens.

The machine body is a monobloc frame structure. The machine’s inertia remains the same for all material thicknesses and sizes to be cut, which gives optimum quality of the laser beam at the cutting head as well as its movement and accuracy. The compactness and robustness of this monobloc structure guarantees an optimum rigidity and stability. The machine frame incorporates collector trays on wheels (situated under
the cutting table) for removal of scrap and small components falling through the table grids

A. Precise positioning & repeatability precision offset rack and pinion system APEX Taiwan

B. Square rail Auto Lube (HIWIN/PMI, Taiwan)

C. Fixed on the stable monobloc structure, the transmission system for the X-, Y- and Z-axis guarantee very precise movements of the gantry and laser cutting head.

Closed loop AC servo drive system and servomotors to ensure high dynamics, vibration- free operation and maximum precision

A. Yaskawa servo motors (Japan) Y Axis Dual Drive (3KW Y1/Y2) X Axis (1800W) Z Axis (850W)

B. The servo reducer (Shimpo, Japan) combined with the transmission system (see 4.5) and optimised for the servo motors results in the desired accuracy and motion at the rack and pinion.
 

A. Power Automation CNC Control with integrated I/O

B. Each PA CNC Systems is equipped with the HMI (Human Machine Interface). With this open, browser based all important control functions are clearly represented to the operator, so it will work within shortest training time efficiently and safely with the CNC system.

C. The CNC Systems are equipped with high-speed processors to accomplish an extremely fast ‘Block Throughput”. Highly accurate contours with very small NC blocks can be processed without any loss of speed. therefore, the machine always reaches the highest productivity.

D. Cypcut laser cutting control system Support AI, DXF, PLT and other graphic data formats

CAD module/ Nesting + processing function.

A. Dual function intelligent cooling system, ensuring the efficient operation of laser cutting head and laser source

B. 1P/1.2P compressor, brands that are Highly efficient and reliable

C. Overcurrent/ overload protection High – and low-pressure protection via means of flow switch

D. High and low temperature alarm signals output E. LCD display temperature controller with multiple function setting and error alarming

 Efficient and reliable centralized lubrication system Automatically provides effective lubrication of mechanical Movement system